- made of transparent acrylic glass, almost invisible
- high-quality, rigid, can be used in different locations
- safe standing on 2 stabilising acrylic glass feet
- with cut-out section/pass-through
- easy to clean plastic surface
- dimensions: 60 x 60 cm, 3 mm thick
- made of transparent plastic film
- lightweight for ease of use
- good hold thanks to feet containing suction pads and adhesives pads
- optimum separation of individual workplaces
- easy-clean plastic surface
- dimensions: approx. 70 (L) x 50 (H) cm, 7 mm thick border
TimeTEX Innovation
- made of transparent plastic film
- lightweight for ease of use
- good hold thanks to feet containing suction pads and adhesives pads
- optimum protection for diagonal seating arrangements due to Z shape
- easy-clean plastic surface
- dimensions: approx. 60/60/60 (L) x 50 (H) cm, 7 mm thick border
TimeTEX Innovation
- made from transparent acrylic glass
- high quality and dimensionally stable, easy to reposition
- secure stand with plywood base
- does not slide around thanks to rubber feet
- easy-clean plastic surface
- dimensions: approx. 60 x 50 cm, 3 mm thick
- made of transparent plastic film
- lightweight for ease of use
- good hold thanks to feet containing suction pads and adhesives pads
- optimum separation of individual workplaces
- easy-clean plastic surface
- dimensions: approx. 106 (L) x 50 (H) cm, 7 mm thick border
TimeTEX Innovation
- made from transparent polycarbonate, highly resistant
- high quality and dimensionally stable, easy to reposition
- wooden support for all tabletops up to 40 mm thick
- can be used as front, side and seat protection
- easy-clean plastic surface
- dimensions: approx. 80 x 60 x 10 cm, 4 mm thick
- made from transparent polycarbonate, highly resistant
- high quality and dimensionally stable, easy to reposition
- wooden support for all tabletops up to 30 mm thick
- can be used as front, side and seat protection
- easy-clean plastic surface
- dimensions: approx. 80 x 60 x 5 cm, 4 mm thick
- made of transparent plastic film
- lightweight for ease of use
- good hold thanks to feet containing suction pads and adhesives pads
- protection on 3 sides thanks to U shape
- easy-clean plastic surface
- dimensions: Approx. 35/70/35 (D) x 50 (H) cm, 7 mm thick border
TimeTEX Innovation
- made of transparent plastic film
- lightweight for ease of use
- good hold thanks to feet containing suction pads and adhesives pads
- optimum protection for parallel seating arrangements due to T shape
- easy-clean plastic surface
- dimensions: approx. 60/50/60 (L) x 50 (H) cm, 7 mm thick border
TimeTEX Innovation
- made from transparent acrylic glass, virutally invisible
- high quality and dimensionally stable, easy to reposition
- secure stand with 2 perpendicular feet made from acrylic glass
- with recess/hatch
- easy-clean plastic surface
- dimensions: approx. 50 x 85 cm, 3 mm thick
- made from transparent acrylic glass, virutally invisible
- high quality and dimensionally stable, easy to reposition
- secure stand with 2 perpendicular feet made from acrylic glass
- with recess/hatch
- easy-clean plastic surface
- dimensions: approx. 70 x 85 cm, 3 mm thick
Partition walls for school desks
A hygienic protective screen provides a partition between individual workplaces and thus protection against infections. It protects against aerosols that are transferred to the person sitting next to you by sneezing, coughing or speaking. It therefore helps to comply with health guidelines for schools and nurseries. The partition wall can be mounted on the desk in just a few simple steps and physically separates the seating areas between pupils. In addition to use in classrooms, the partitions are of course also suitable for offices or other facilities.
Types of classroom desk partitions from TimeTEX
At TimeTEX, we offer a wide range of partitions for schools. The protective screens are available individually or as a set.
Simple partition made from plastic film
The Basic hygienic protection screen is covered with a transparent film that is easy to clean. The film is held taut all round by plastic rods edged with nylon fabric. The feet are fitted with suction cups and can be positioned and fixed on any smooth surface. Adhesive pads are also supplied so that you can permanently fix the hygiene stand to any surface. It is light weighted and therefore makes it quick to set up and store away.
Hygiene protective wall made of transparent acrylic glass
Another partition wall variant is the Standard XL hygiene partition. This is made of transparent acrylic glass. The base of the barrier has a recess that can be used as a hatch. The design gives the safety barrier good stability without adding unnecessary weight. Thanks to the completely acrylic glass look, the safety barrier appears almost invisible.
“Limes” hygiene barrier made of transparent polycarbonate
This protection screen is made of transparent polycarbonate and is therefore particularly resistant to breakage. It is also easy to clean. The transparent plastic panel can be attached to any tabletop up to 40 mm thick using the table holder. The special feature of this Limes hygiene safety screen is that it is firmly screwed to the table top. In contrast to loosely installed safety barriers, which can fall down, this eliminates the risk of accidents. The attractive appearance emphasises the high quality craftsmanship of this product.
Our school partition walls are an excellent way of protecting pupils from viruses. They are also very easy to install on desks. The hygienic protective screens prevent direct contact between students and reduce the spread of viruses. The hygienic protective screen is an important part of the school's protection policy and helps to ensure the health of pupils in the classroom.